-
C3604 Brass inspection and measurement methods
C3604 Brass is a free cutting brass with lead, the standard choice for turned parts that have to be fast to make It is used for fittings, connectors and turned components where machinability drives the cost. Typical valu
Details -
Splined Shafts inspection and measurement methods
Splined Shafts is a shaft with a series of ridges that transmit torque to a mating hub It is used for drive applications where a keyway would be too weak or would need an accurate fit. Typical values: common forms involu
Details -
O-Ring Grooves inspection and measurement methods
O-Ring Grooves is a groove that locates and compresses an elastomer seal between two faces It is used for any assembly that has to hold pressure without a gasket or a sealant. Typical values: standard ISO 3601 for the gr
Details -
Bearing Housings inspection and measurement methods
Bearing Housings is a bore and shoulder arrangement that locates a rolling bearing and keeps it square It is used for rotating assemblies where the bearing position sets the shaft alignment. Typical values: bore toleranc
Details -
Reaming and Boring inspection and measurement methods
Reaming and Boring is finishing a hole to size with a multi tooth reamer or an adjustable single point boring head It is used for holding hole size and position more closely than drilling can. Typical values: typical tol
Details -
Inconel 718 inspection and measurement methods
Inconel 718 is a nickel chromium super alloy that holds strength at high temperature It is used for turbine, downhole and high temperature parts where creep and oxidation set the limit. Typical values: tensile strength 1
Details -
Ti-6Al-4V Titanium inspection and measurement methods
Ti-6Al-4V Titanium is the standard titanium alloy, with aluminium and vanadium, used where weight and corrosion matter It is used for aerospace structures, medical implants and high performance parts. Typical values: ten
Details -
Duplex 2205 Stainless Steel inspection and measurement methods
Duplex 2205 Stainless Steel is a two phase stainless steel with roughly equal ferrite and austenite It is used for parts that need high strength and resistance to chloride stress corrosion. Typical values: tensile streng
Details -
PEEK inspection and measurement methods
PEEK is a high performance thermoplastic that holds its properties at temperature and resists chemicals It is used for parts that have to work where a metal corrodes or where weight and insulation matter. Typical values:
Details -
2024-T3 Aluminium inspection and measurement methods
2024-T3 Aluminium is an aluminium copper alloy in the T3 temper, known for fatigue resistance It is used for aerospace sheet and plate parts where the load cycles rather than sits. Typical values: tensile strength 483 MP
Details
Search:
