-
EN 10204 Material Certificates inspection and measurement methods
EN 10204 Material Certificates is a standard that defines the type of inspection document supplied with a material It is used for proving that the material in the part is what the drawing called for. Typical values: type
Details -
PPAP Submission inspection and measurement methods
PPAP Submission is the production part approval process used in the automotive supply chain, at four levels of evidence It is used for proving that a production process can make the part repeatedly, before series supply
Details -
4140 Alloy Steel inspection and measurement methods
4140 Alloy Steel is a chromium molybdenum alloy steel used in the quenched and tempered condition It is used for shafts, gears and high strength parts that are heat treated after rough machining. Typical values: tensile
Details -
Hydraulic Manifolds inspection and measurement methods
Hydraulic Manifolds is a block with drilled and ported passages that connects valves, pumps and actuators It is used for replacing pipework with a single machined block, in mobile and industrial hydraulics. Typical value
Details -
Heat Sinks inspection and measurement methods
Heat Sinks is a machined or extruded finned body that carries heat away from a component It is used for power electronics, LED assemblies and any enclosure that generates heat. Typical values: material aluminium, or copp
Details -
Mould Inserts inspection and measurement methods
Mould Inserts is a replaceable steel component that forms part of a mould cavity It is used for moulds where a wear area, a core or a detail needs to be replaced or machined separately. Typical values: material H13, or a
Details -
Geometric Dimensioning and Tolerancing inspection and measurement methods
Geometric Dimensioning and Tolerancing is a symbolic language on the drawing that controls form, orientation and position It is used for saying what a part actually has to do, instead of relying on plus minus dimensions
Details -
Surface Roughness inspection and measurement methods
Surface Roughness is the measure of the fine peaks and valleys left on a surface by the manufacturing process It is used for controlling friction, wear, sealing and appearance on a finished face. Typical values: paramete
Details -
ISO 2768 General Tolerances inspection and measurement methods
ISO 2768 General Tolerances is a standard that sets the tolerance for dimensions that have no individual tolerance on the drawing It is used for keeping a drawing readable, by not dimensioning every non critical size. Ty
Details -
First Article Inspection inspection and measurement methods
First Article Inspection is a full dimensional check of the first part from a new setup, reported against the drawing It is used for proving that the process can make the part before the batch is committed. Typical value
Details
Search:
