-
17-4PH Stainless Steel inspection and measurement methods
17-4PH Stainless Steel is a precipitation hardening martensitic stainless steel, used in the H900 condition for strength It is used for parts that need the corrosion resistance of stainless with the strength of an alloy
Details -
Lapping inspection and measurement methods
Lapping is a fine finishing process where the part is rubbed against a lap with a loose abrasive slurry It is used for achieving extreme flatness and a very fine finish on sealing and gauging faces. Typical values: flatn
Details -
Honing inspection and measurement methods
Honing is an abrasive finishing process that uses expanding stones to correct bore geometry It is used for holding roundness, straightness and a controlled surface pattern in a bore. Typical values: diameter range 5 to 5
Details -
Wire EDM inspection and measurement methods
Wire EDM is a spark erosion process that cuts a profile with a thin travelling wire in deionised water It is used for cutting hardened material, sharp internal corners and parts with no cutting force. Typical values: typ
Details -
Sinker EDM inspection and measurement methods
Sinker EDM is a spark erosion process that forms a cavity with a shaped electrode in dielectric fluid It is used for producing blind cavities, deep ribs and fine detail in hardened material. Typical values: typical toler
Details -
Deburring inspection and measurement methods
Deburring is the removal of burrs and the rounding of sharp edges after machining It is used for making parts safe to handle, and stopping burrs from interfering with assembly. Typical values: edge radius 0.1 to 0.5 mm t
Details -
6061-T6 Aluminium inspection and measurement methods
6061-T6 Aluminium is a heat treatable aluminium alloy with magnesium and silicon, in the T6 temper It is used for general machined parts where weight, strength and cost have to be balanced. Typical values: tensile streng
Details -
7075-T6 Aluminium inspection and measurement methods
7075-T6 Aluminium is a high strength aluminium alloy with zinc as the main addition, in the T6 temper It is used for aerospace and motorsport parts where strength to weight is the deciding factor. Typical values: tensile
Details -
304 Stainless Steel inspection and measurement methods
304 Stainless Steel is the general purpose austenitic stainless steel, with chromium and nickel It is used for general corrosion resistant parts where the chloride resistance of 316L is not needed. Typical values: tensil
Details -
316L Stainless Steel inspection and measurement methods
316L Stainless Steel is a low carbon austenitic stainless steel with molybdenum, for corrosion resistance It is used for medical, food and marine parts, and anything that has to be cleaned aggressively. Typical values: t
Details
Search:
