-
Wire EDM vs Reaming and Boring: which one fits your part
Wire EDM is a spark erosion process that cuts a profile with a thin travelling wire in deionised water It is used for cutting hardened material, sharp internal corners and parts with no cutting force. Typical values: typ
Details -
Sinker EDM vs Reaming and Boring: which one fits your part
Sinker EDM is a spark erosion process that forms a cavity with a shaped electrode in dielectric fluid It is used for producing blind cavities, deep ribs and fine detail in hardened material. Typical values: typical toler
Details -
6061-T6 Aluminium vs Inconel 718: which one fits your part
6061-T6 Aluminium is a heat treatable aluminium alloy with magnesium and silicon, in the T6 temper It is used for general machined parts where weight, strength and cost have to be balanced. Typical values: tensile streng
Details -
7075-T6 Aluminium vs Inconel 718: which one fits your part
7075-T6 Aluminium is a high strength aluminium alloy with zinc as the main addition, in the T6 temper It is used for aerospace and motorsport parts where strength to weight is the deciding factor. Typical values: tensile
Details -
2024-T3 Aluminium vs Inconel 718: which one fits your part
2024-T3 Aluminium is an aluminium copper alloy in the T3 temper, known for fatigue resistance It is used for aerospace sheet and plate parts where the load cycles rather than sits. Typical values: tensile strength 483 MP
Details -
316L Stainless Steel vs Inconel 718: which one fits your part
316L Stainless Steel is a low carbon austenitic stainless steel with molybdenum, for corrosion resistance It is used for medical, food and marine parts, and anything that has to be cleaned aggressively. Typical values: t
Details -
304 Stainless Steel vs C3604 Brass: which one fits your part
304 Stainless Steel is the general purpose austenitic stainless steel, with chromium and nickel It is used for general corrosion resistant parts where the chloride resistance of 316L is not needed. Typical values: tensil
Details -
17-4PH Stainless Steel vs C3604 Brass: which one fits your part
17-4PH Stainless Steel is a precipitation hardening martensitic stainless steel, used in the H900 condition for strength It is used for parts that need the corrosion resistance of stainless with the strength of an alloy
Details -
Thread Milling vs Reaming and Boring: which one fits your part
Thread Milling is cutting a thread with a rotating cutter that interpolates a helical path, rather than with a tap It is used for threads in hard material, large threads and threads that must be concentric with another f
Details -
Lapping vs Deep Hole Drilling: which one fits your part
Lapping is a fine finishing process where the part is rubbed against a lap with a loose abrasive slurry It is used for achieving extreme flatness and a very fine finish on sealing and gauging faces. Typical values: flatn
Details
Search:
