-
Assembly Fit Check for Warehouse Robot Lift Column: Machining to the Mating Part
Machining an extruded and machined aluminium column for a goods-to-person robot against its mating part: how the fit was defined, checked on the shop floor and then verified at the customer's assembly line.
Details -
Material Change for Warehouse Robot Lift Column: Trial, Validation and Approval
A material change programme for an extruded and machined aluminium column for a goods-to-person robot: why the change was needed, how the trial part was machined and tested, and how the new material was validated and approved.
Details -
Batch Repeatability: 5 Units of Warehouse Robot Lift Column to One Standard
How we held consistent results across a 5-unit batch of an extruded and machined aluminium column for a goods-to-person robot: the controls on tooling, offsets and inspection that keep the first part and the last part the same.
Details -
Design Feedback on Warehouse Robot Lift Column: Changes Proposed Before Cutting
A design-for-manufacture review of an extruded and machined aluminium column for a goods-to-person robot: the features that were expensive to produce, the changes we proposed, and how the function was preserved while simplifying the process.
Details -
Cycle Time Down by 25 per cent: Machining Warehouse Robot Lift Column
A machining improvement programme on an extruded and machined aluminium column for a goods-to-person robot: where the time was going, what we changed in roughing, tooling and handling, and the 25 per cent saving achieved without touching the.
Details -
Re-sourcing Warehouse Robot Lift Column: Taking Over an Existing Programme
How we took over an established programme for an extruded and machined aluminium column for a goods-to-person robot: reviewing inherited drawings and samples, rebuilding the process, proving it and shipping the first approved batch.
Details -
Documentation Pack for AGV Wheel Hub: What Shipped with the Order
The documentation supplied with a shipment of a steel wheel hub for an automated guided vehicle: what each document is for, why it matters at goods-in and how it is kept valid for repeat orders.
Details -
Fixture Strategy for Warehouse Robot Lift Column: How We Held the Part
The fixture strategy behind an extruded and machined aluminium column for a goods-to-person robot: how we located the part on its drawing datums, what was built, why those decisions were taken and how the setup performed in production.
Details -
Scheduled Repeat Supply of AGV Wheel Hub: Planning, Stock and Kanban
A scheduled supply programme for a steel wheel hub for an automated guided vehicle: how releases were agreed, how stock and tooling were held, and how forecast changes were handled without disruption.
Details -
Emergency Rework: Recovering a AGV Wheel Hub Order Against the Clock
An emergency recovery job involving a steel wheel hub for an automated guided vehicle: what went wrong at another source, how we planned the recovery in parallel, and how usable parts reached the customer line in time.
Details -
Material Change for AGV Wheel Hub: Trial, Validation and Approval
A material change programme for a steel wheel hub for an automated guided vehicle: why the change was needed, how the trial part was machined and tested, and how the new material was validated and approved.
Details -
Assembly Fit Check for AGV Wheel Hub: Machining to the Mating Part
Machining a steel wheel hub for an automated guided vehicle against its mating part: how the fit was defined, checked on the shop floor and then verified at the customer's assembly line.
Details
Case Studies
