-
Scheduled Repeat Supply of Linear Actuator End Block: Planning, Stock and Kanban
A scheduled supply programme for an aluminium block carrying bearings and a ball screw nut: how releases were agreed, how stock and tooling were held, and how forecast changes were handled without disruption.
Details -
Assembly Fit Check for Linear Actuator End Block: Machining to the Mating Part
Machining an aluminium block carrying bearings and a ball screw nut against its mating part: how the fit was defined, checked on the shop floor and then verified at the customer's assembly line.
Details -
Emergency Rework: Recovering a Linear Actuator End Block Order Against the Clock
An emergency recovery job involving an aluminium block carrying bearings and a ball screw nut: what went wrong at another source, how we planned the recovery in parallel, and how usable parts reached the customer line in time.
Details -
Material Change for Linear Actuator End Block: Trial, Validation and Approval
A material change programme for an aluminium block carrying bearings and a ball screw nut: why the change was needed, how the trial part was machined and tested, and how the new material was validated and approved.
Details -
Design Feedback on Linear Actuator End Block: Changes Proposed Before Cutting
A design-for-manufacture review of an aluminium block carrying bearings and a ball screw nut: the features that were expensive to produce, the changes we proposed, and how the function was preserved while simplifying the process.
Details -
Cycle Time Down by 25 per cent: Machining Linear Actuator End Block
A machining improvement programme on an aluminium block carrying bearings and a ball screw nut: where the time was going, what we changed in roughing, tooling and handling, and the 25 per cent saving achieved without touching the drawing.
Details -
Batch Repeatability: 5 Units of Linear Actuator End Block to One Standard
How we held consistent results across a 5-unit batch of an aluminium block carrying bearings and a ball screw nut: the controls on tooling, offsets and inspection that keep the first part and the last part the same.
Details -
Re-sourcing Linear Actuator End Block: Taking Over an Existing Programme
How we took over an established programme for an aluminium block carrying bearings and a ball screw nut: reviewing inherited drawings and samples, rebuilding the process, proving it and shipping the first approved batch.
Details -
Fixture Strategy for Linear Actuator End Block: How We Held the Part
The fixture strategy behind an aluminium block carrying bearings and a ball screw nut: how we located the part on its drawing datums, what was built, why those decisions were taken and how the setup performed in production.
Details -
Documentation Pack for Warehouse Robot Lift Column: What Shipped with the Order
The documentation supplied with a shipment of an extruded and machined aluminium column for a goods-to-person robot: what each document is for, why it matters at goods-in and how it is kept valid for repeat orders.
Details -
Emergency Rework: Recovering a Warehouse Robot Lift Column Order Against the Clock
An emergency recovery job involving an extruded and machined aluminium column for a goods-to-person robot: what went wrong at another source, how we planned the recovery in parallel, and how usable parts reached the customer line in time.
Details -
Scheduled Repeat Supply of Warehouse Robot Lift Column: Planning, Stock and Kanban
A scheduled supply programme for an extruded and machined aluminium column for a goods-to-person robot: how releases were agreed, how stock and tooling were held, and how forecast changes were handled without disruption.
Details
Case Studies
