-
Wire EDM Machine vs Jig Boring Machine: which one fits your part
Wire EDM Machine is a machine that cuts conductive material with a travelling brass wire in deionised water, by spark erosion It is used for internal profiles, sharp internal corners and hardened parts that cannot be mil
Details -
Sinker EDM Machine vs Jig Boring Machine: which one fits your part
Sinker EDM Machine is a machine that forms a cavity by sparking a shaped electrode into the workpiece under dielectric fluid It is used for blind cavities, sharp corners, deep ribs and textured mould surfaces. Typical va
Details -
Cylindrical Grinding Machine vs Coordinate Measuring Machine: which one fits your part
Cylindrical Grinding Machine is a machine that finishes external and internal diameters with a rotating wheel and a rotating workpiece It is used for holding diameter tolerance and roundness on shafts, pins and bores aft
Details -
Surface Grinding Machine vs Coordinate Measuring Machine: which one fits your part
Surface Grinding Machine is a machine that finishes flat faces with a rotating abrasive wheel and a reciprocating table It is used for holding flatness and parallelism on faces that seal or locate. Typical values: table
Details -
CNC Drilling Machine vs Jig Boring Machine: which one fits your part
CNC Drilling Machine is a machine dedicated to producing holes, with a spindle feed and often a multi spindle head It is used for production drilling, tapping and countersinking on parts with many holes. Typical values:
Details -
CNC Lathe vs Jig Boring Machine: which one fits your part
CNC Lathe is a machine that turns the workpiece against a single point tool to produce cylindrical forms It is used for shafts, bushings, flanges and any part whose main features are diameters. Typical values: swing over
Details -
Swiss-Type Lathe vs Jig Boring Machine: which one fits your part
Swiss-Type Lathe is a sliding headstock lathe where the bar is supported close to the cutting point by a guide bushing It is used for long, slender turned parts where the length to diameter ratio defeats a conventional l
Details -
PPAP Submission specifications: what the numbers mean
PPAP Submission is the production part approval process used in the automotive supply chain, at four levels of evidence It is used for proving that a production process can make the part repeatedly, before series supply
Details -
Turn-Mill Centre vs Jig Boring Machine: which one fits your part
Turn-Mill Centre is a lathe with driven tooling and a Y axis, so milling and turning are completed in one machine It is used for complex parts that would otherwise move between a lathe and a machining centre. Typical val
Details -
CNC Milling Machine vs Cylindrical Grinding Machine: which one fits your part
CNC Milling Machine is a machine tool that removes material with a rotating cutter while the workpiece is clamped to a moving table It is used for producing prismatic parts, pockets, slots and contoured faces to a drawin
Details
Search:
