-
Common problems with Sinker EDM Machine and how to avoid them
Sinker EDM Machine is a machine that forms a cavity by sparking a shaped electrode into the workpiece under dielectric fluid It is used for blind cavities, sharp corners, deep ribs and textured mould surfaces. Typical va
Details -
Common problems with Hard Milling and how to avoid them
Hard Milling is milling material in its hardened state, usually above 45 HRC, with coated carbide or ceramic tools It is used for finishing hardened tool steel and bearing steel without grinding or EDM. Typical values: h
Details -
Common problems with High Speed Machining and how to avoid them
High Speed Machining is milling at high spindle speed with light radial engagement and high feed per tooth It is used for removing metal quickly from thin walled or difficult parts with low cutting force. Typical values:
Details -
Common problems with Thread Milling and how to avoid them
Thread Milling is cutting a thread with a rotating cutter that interpolates a helical path, rather than with a tap It is used for threads in hard material, large threads and threads that must be concentric with another f
Details -
Common problems with Deep Hole Drilling and how to avoid them
Deep Hole Drilling is drilling holes deeper than about ten times the diameter, with guided tools and high pressure coolant It is used for cooling channels, hydraulic bores and long oil ways that cannot be reached with a
Details -
Common problems with CNC Drilling Machine and how to avoid them
CNC Drilling Machine is a machine dedicated to producing holes, with a spindle feed and often a multi spindle head It is used for production drilling, tapping and countersinking on parts with many holes. Typical values:
Details -
Common problems with Reaming and Boring and how to avoid them
Reaming and Boring is finishing a hole to size with a multi tooth reamer or an adjustable single point boring head It is used for holding hole size and position more closely than drilling can. Typical values: typical tol
Details -
Common problems with Honing and how to avoid them
Honing is an abrasive finishing process that uses expanding stones to correct bore geometry It is used for holding roundness, straightness and a controlled surface pattern in a bore. Typical values: diameter range 5 to 5
Details -
Common problems with CNC Turning and how to avoid them
CNC Turning is a cutting process where the workpiece rotates and a single point tool removes material It is used for producing diameters, faces, grooves and threads on rotational parts. Typical values: typical tolerance
Details -
Common problems with Turn-Mill Centre and how to avoid them
Turn-Mill Centre is a lathe with driven tooling and a Y axis, so milling and turning are completed in one machine It is used for complex parts that would otherwise move between a lathe and a machining centre. Typical val
Details
Search:
