-
What drives the cost of 6061-T6 Aluminium
6061-T6 Aluminium is a heat treatable aluminium alloy with magnesium and silicon, in the T6 temper It is used for general machined parts where weight, strength and cost have to be balanced. Typical values: tensile streng
Details -
What drives the cost of 2024-T3 Aluminium
2024-T3 Aluminium is an aluminium copper alloy in the T3 temper, known for fatigue resistance It is used for aerospace sheet and plate parts where the load cycles rather than sits. Typical values: tensile strength 483 MP
Details -
What drives the cost of 7075-T6 Aluminium
7075-T6 Aluminium is a high strength aluminium alloy with zinc as the main addition, in the T6 temper It is used for aerospace and motorsport parts where strength to weight is the deciding factor. Typical values: tensile
Details -
What drives the cost of 304 Stainless Steel
304 Stainless Steel is the general purpose austenitic stainless steel, with chromium and nickel It is used for general corrosion resistant parts where the chloride resistance of 316L is not needed. Typical values: tensil
Details -
What drives the cost of 17-4PH Stainless Steel
17-4PH Stainless Steel is a precipitation hardening martensitic stainless steel, used in the H900 condition for strength It is used for parts that need the corrosion resistance of stainless with the strength of an alloy
Details -
What drives the cost of Lapping
Lapping is a fine finishing process where the part is rubbed against a lap with a loose abrasive slurry It is used for achieving extreme flatness and a very fine finish on sealing and gauging faces. Typical values: flatn
Details -
What drives the cost of Reaming and Boring
Reaming and Boring is finishing a hole to size with a multi tooth reamer or an adjustable single point boring head It is used for holding hole size and position more closely than drilling can. Typical values: typical tol
Details -
What drives the cost of Wire EDM
Wire EDM is a spark erosion process that cuts a profile with a thin travelling wire in deionised water It is used for cutting hardened material, sharp internal corners and parts with no cutting force. Typical values: typ
Details -
What drives the cost of Deburring
Deburring is the removal of burrs and the rounding of sharp edges after machining It is used for making parts safe to handle, and stopping burrs from interfering with assembly. Typical values: edge radius 0.1 to 0.5 mm t
Details -
What drives the cost of Sinker EDM
Sinker EDM is a spark erosion process that forms a cavity with a shaped electrode in dielectric fluid It is used for producing blind cavities, deep ribs and fine detail in hardened material. Typical values: typical toler
Details
Search:
