-
Lapping setup, maintenance and daily checks
Lapping is a fine finishing process where the part is rubbed against a lap with a loose abrasive slurry It is used for achieving extreme flatness and a very fine finish on sealing and gauging faces. Typical values: flatn
Details -
Cylindrical Grinding Machine setup, maintenance and daily checks
Cylindrical Grinding Machine is a machine that finishes external and internal diameters with a rotating wheel and a rotating workpiece It is used for holding diameter tolerance and roundness on shafts, pins and bores aft
Details -
CNC Drilling Machine setup, maintenance and daily checks
CNC Drilling Machine is a machine dedicated to producing holes, with a spindle feed and often a multi spindle head It is used for production drilling, tapping and countersinking on parts with many holes. Typical values:
Details -
CNC Milling setup, maintenance and daily checks
CNC Milling is a cutting process where a rotating multi tooth tool removes material from a stationary workpiece It is used for producing flat faces, pockets, slots and contoured surfaces on prismatic parts. Typical value
Details -
CNC Turning setup, maintenance and daily checks
CNC Turning is a cutting process where the workpiece rotates and a single point tool removes material It is used for producing diameters, faces, grooves and threads on rotational parts. Typical values: typical tolerance
Details -
Hard Milling setup, maintenance and daily checks
Hard Milling is milling material in its hardened state, usually above 45 HRC, with coated carbide or ceramic tools It is used for finishing hardened tool steel and bearing steel without grinding or EDM. Typical values: h
Details -
High Speed Machining setup, maintenance and daily checks
High Speed Machining is milling at high spindle speed with light radial engagement and high feed per tooth It is used for removing metal quickly from thin walled or difficult parts with low cutting force. Typical values:
Details -
Deep Hole Drilling setup, maintenance and daily checks
Deep Hole Drilling is drilling holes deeper than about ten times the diameter, with guided tools and high pressure coolant It is used for cooling channels, hydraulic bores and long oil ways that cannot be reached with a
Details -
Honing setup, maintenance and daily checks
Honing is an abrasive finishing process that uses expanding stones to correct bore geometry It is used for holding roundness, straightness and a controlled surface pattern in a bore. Typical values: diameter range 5 to 5
Details -
Thread Milling setup, maintenance and daily checks
Thread Milling is cutting a thread with a rotating cutter that interpolates a helical path, rather than with a tap It is used for threads in hard material, large threads and threads that must be concentric with another f
Details
Search:
