Tooling, Moulds, Dies, Jigs & Fixtures | www.cnctt.com - Page 330 - www.cnctt.com

Welcome to www.cnctt.com official website!

Company Introduction Contact Us Sitemap

Tools & Molds

Tooling for production: injection moulds and die casting dies, cutting tools, jigs and fixtures designed and built to hold accuracy over long runs.

Contact Us

Tools & Molds

Your Location: Home - Tools & Molds

Tools & Molds

Thin-Wall Die Casting Die for industrial pump housings – cavity tolerance of ±0.05 mm, cavity tolerance ±0.05 mm Series 2
Die Casting Die for automotive structural components – wall thickness down to 1.0 mm, cavity tolerance ±0.05 mm Series 3
Aluminium Die Casting Die for LED lighting housings – shot weights from 50 g to 8 kg, cavity tolerance ±0.05 mm Series 3
Zinc Die Casting Die for power tool bodies – vacuum assisted filling, cavity tolerance ±0.05 mm Series 2
Die Casting Trim Die for appliance frames – die life above 100,000 shots, cavity tolerance ±0.05 mm
Cold Chamber Die for appliance frames – die life above 100,000 shots, cavity tolerance ±0.05 mm Series 2
Multi-Cavity Die Casting Die for industrial pump housings – cavity tolerance of ±0.05 mm, cavity tolerance ±0.05 mm Series 2
Vacuum Die Casting Die for automotive structural components – wall thickness down to 1.0 mm, cavity tolerance ±0.05 mm Series 2
Hot Chamber Die for telecom heat sink castings – cycle times from 25 seconds, cavity tolerance ±0.05 mm Series 2
Thin-Wall Die Casting Die for industrial pump housings – cavity tolerance of ±0.05 mm, cavity tolerance ±0.05 mm
Aluminium Die Casting Die for LED lighting housings – shot weights from 50 g to 8 kg, cavity tolerance ±0.05 mm Series 2
Die Casting Die for automotive structural components – wall thickness down to 1.0 mm, cavity tolerance ±0.05 mm Series 2

Home 1 ... 329 330 331 ... 334 Last page Total 4,000 items

Online customer service

WeChat contact

Customer service

Scan code to add Wechat (same mobile phone number)

Telephone consultation

Back to top