Tooling, Moulds, Dies, Jigs & Fixtures | www.cnctt.com - Page 329 - www.cnctt.com

Welcome to www.cnctt.com official website!

Company Introduction Contact Us Sitemap

Tools & Molds

Tooling for production: injection moulds and die casting dies, cutting tools, jigs and fixtures designed and built to hold accuracy over long runs.

Contact Us

Tools & Molds

Your Location: Home - Tools & Molds

Tools & Molds

Transfer Die for automotive body and bracket work – strokes to 200 per minute, ±0.05 mm
Bending and Forming Tool for electrical contact and terminal production – press forces to 250 tonnes, ±0.05 mm
Zinc Die Casting Die for power tool bodies – vacuum assisted filling, cavity tolerance ±0.05 mm Series 3
Hot Chamber Die for telecom heat sink castings – cycle times from 25 seconds, cavity tolerance ±0.05 mm Series 3
Cold Chamber Die for appliance frames – die life above 100,000 shots, cavity tolerance ±0.05 mm Series 3
Multi-Cavity Die Casting Die for industrial pump housings – cavity tolerance of ±0.05 mm, cavity tolerance ±0.05 mm Series 3
Progressive Stamping Die for automotive body and bracket work – strokes to 200 per minute, ±0.05 mm
Forming Die for appliance panel production – tool life above 1 million strokes, ±0.05 mm
Squeeze Casting Die for LED lighting housings – shot weights from 50 g to 8 kg, cavity tolerance ±0.05 mm Series 2
Prototype Die Casting Tool for power tool bodies – vacuum assisted filling, cavity tolerance ±0.05 mm Series 2
Magnesium Die Casting Die for telecom heat sink castings – cycle times from 25 seconds, cavity tolerance ±0.05 mm Series 2
Die Casting Trim Die for appliance frames – die life above 100,000 shots, cavity tolerance ±0.05 mm Series 2

Home 1 ... 328 329 330 ... 334 Last page Total 4,000 items

Online customer service

WeChat contact

Customer service

Scan code to add Wechat (same mobile phone number)

Telephone consultation

Back to top