-
Fast Turnaround: Robot Arm Joint Housing from Drawing to First Article
A rapid turnaround case on an aluminium housing carrying a harmonic drive gearbox: how the job was planned in parallel, programmed and fixtured, and how the first article was approved and delivered against a tight deadline.
Details -
Robot Arm Joint Housing Cost-Down Programme: Lower Unit Cost Without Changing the Drawing
A cost-reduction case study on an aluminium housing carrying a harmonic drive gearbox: where the unit cost actually sat, what we changed in the process, the saving achieved and how the specified quality was protected.
Details -
Robot Arm Joint Housing CNC Machining Case Study: Brief, Process and Result
A CNC machining case study covering an aluminium housing carrying a harmonic drive gearbox: the customer brief, the machining challenge, the process route we used and the result delivered on the production order.
Details -
Holding Tight Tolerance on Robot Arm Joint Housing: A Machining Case Study
How we held the required tolerance on an aluminium housing carrying a harmonic drive gearbox: where the dimensional risk sat, the controls we put in place, how the result was verified and what the customer received at goods-in.
Details -
Quality Plan for Hardened Motorcycle Sprocket: First Article, Inspection and Zero Defects
The quality plan behind a zero-defect delivery of a rear sprocket cut from medium carbon steel and heat treated: the control plan, in-process controls, final verification and the result recorded at the customer's goods-in.
Details -
Export Programme: Hardened Motorcycle Sprocket for a European Machine Builder
An export supply case for a rear sprocket cut from medium carbon steel and heat treated: the customer's market and documentation requirements, the compliance work, packaging and logistics, the goods-in result and how the ongoing programme is.
Details -
5-Axis Strategy for Hardened Motorcycle Sprocket: One Setup, Fewer Fixtures
A five-axis machining case study on a rear sprocket cut from medium carbon steel and heat treated: why the part suited a single-setup strategy, how the toolpath was programmed and simulated, how it was held and verified, and what it saved.
Details -
Prototype to Production: Scaling Hardened Motorcycle Sprocket with CNC Machining
How a rear sprocket cut from medium carbon steel and heat treated moved from a machined prototype to a repeatable production programme: design for manufacture changes, fixtures for volume, process capability and the delivery pattern agreed with.
Details -
Surface Finish and Finishing for Hardened Motorcycle Sprocket: A Case Study
A finishing case study on a rear sprocket cut from medium carbon steel and heat treated: the surface requirement, the machining strategy used to achieve it, the finishing operations applied, how the finish was inspected and how the parts were.
Details -
Material Selection for Hardened Motorcycle Sprocket: A Machining Case Study
A material selection case study for a rear sprocket cut from medium carbon steel and heat treated: why the original material was reviewed, what it was changed to, what that changed in machining and how the new specification was approved.
Details -
Fast Turnaround: Hardened Motorcycle Sprocket from Drawing to First Article
A rapid turnaround case on a rear sprocket cut from medium carbon steel and heat treated: how the job was planned in parallel, programmed and fixtured, and how the first article was approved and delivered against a tight deadline.
Details -
Hardened Motorcycle Sprocket Cost-Down Programme: Lower Unit Cost Without Changing the Drawing
A cost-reduction case study on a rear sprocket cut from medium carbon steel and heat treated: where the unit cost actually sat, what we changed in the process, the saving achieved and how the specified quality was protected.
Details
Case Studies
