-
Cycle Time Down by 25 per cent: Machining Packaging Sealing Jaw Body
A machining improvement programme on an aluminium jaw body carrying heater cartridges: where the time was going, what we changed in roughing, tooling and handling, and the 25 per cent saving achieved without touching the drawing.
Details -
Re-sourcing Packaging Sealing Jaw Body: Taking Over an Existing Programme
How we took over an established programme for an aluminium jaw body carrying heater cartridges: reviewing inherited drawings and samples, rebuilding the process, proving it and shipping the first approved batch.
Details -
Fixture Strategy for Packaging Sealing Jaw Body: How We Held the Part
The fixture strategy behind an aluminium jaw body carrying heater cartridges: how we located the part on its drawing datums, what was built, why those decisions were taken and how the setup performed in production.
Details -
Scheduled Repeat Supply of Textile Machine Guide Bar: Planning, Stock and Kanban
A scheduled supply programme for a long aluminium bar carrying hundreds of thread guides: how releases were agreed, how stock and tooling were held, and how forecast changes were handled without disruption.
Details -
Documentation Pack for Textile Machine Guide Bar: What Shipped with the Order
The documentation supplied with a shipment of a long aluminium bar carrying hundreds of thread guides: what each document is for, why it matters at goods-in and how it is kept valid for repeat orders.
Details -
Emergency Rework: Recovering a Textile Machine Guide Bar Order Against the Clock
An emergency recovery job involving a long aluminium bar carrying hundreds of thread guides: what went wrong at another source, how we planned the recovery in parallel, and how usable parts reached the customer line in time.
Details -
Assembly Fit Check for Textile Machine Guide Bar: Machining to the Mating Part
Machining a long aluminium bar carrying hundreds of thread guides against its mating part: how the fit was defined, checked on the shop floor and then verified at the customer's assembly line.
Details -
Design Feedback on Textile Machine Guide Bar: Changes Proposed Before Cutting
A design-for-manufacture review of a long aluminium bar carrying hundreds of thread guides: the features that were expensive to produce, the changes we proposed, and how the function was preserved while simplifying the process.
Details -
Material Change for Textile Machine Guide Bar: Trial, Validation and Approval
A material change programme for a long aluminium bar carrying hundreds of thread guides: why the change was needed, how the trial part was machined and tested, and how the new material was validated and approved.
Details -
Batch Repeatability: 5 Units of Textile Machine Guide Bar to One Standard
How we held consistent results across a 5-unit batch of a long aluminium bar carrying hundreds of thread guides: the controls on tooling, offsets and inspection that keep the first part and the last part the same.
Details -
Cycle Time Down by 25 per cent: Machining Textile Machine Guide Bar
A machining improvement programme on a long aluminium bar carrying hundreds of thread guides: where the time was going, what we changed in roughing, tooling and handling, and the 25 per cent saving achieved without touching the drawing.
Details -
Re-sourcing Textile Machine Guide Bar: Taking Over an Existing Programme
How we took over an established programme for a long aluminium bar carrying hundreds of thread guides: reviewing inherited drawings and samples, rebuilding the process, proving it and shipping the first approved batch.
Details
Case Studies
