-
Design tips that make Inconel 718 easier and cheaper
Inconel 718 is a nickel chromium super alloy that holds strength at high temperature It is used for turbine, downhole and high temperature parts where creep and oxidation set the limit. Typical values: tensile strength 1
Details -
Design tips that make Duplex 2205 Stainless Steel easier and cheaper
Duplex 2205 Stainless Steel is a two phase stainless steel with roughly equal ferrite and austenite It is used for parts that need high strength and resistance to chloride stress corrosion. Typical values: tensile streng
Details -
Design tips that make 2024-T3 Aluminium easier and cheaper
2024-T3 Aluminium is an aluminium copper alloy in the T3 temper, known for fatigue resistance It is used for aerospace sheet and plate parts where the load cycles rather than sits. Typical values: tensile strength 483 MP
Details -
Design tips that make C3604 Brass easier and cheaper
C3604 Brass is a free cutting brass with lead, the standard choice for turned parts that have to be fast to make It is used for fittings, connectors and turned components where machinability drives the cost. Typical valu
Details -
Design tips that make Sinker EDM easier and cheaper
Sinker EDM is a spark erosion process that forms a cavity with a shaped electrode in dielectric fluid It is used for producing blind cavities, deep ribs and fine detail in hardened material. Typical values: typical toler
Details -
Design tips that make 4140 Alloy Steel easier and cheaper
4140 Alloy Steel is a chromium molybdenum alloy steel used in the quenched and tempered condition It is used for shafts, gears and high strength parts that are heat treated after rough machining. Typical values: tensile
Details -
Design tips that make PEEK easier and cheaper
PEEK is a high performance thermoplastic that holds its properties at temperature and resists chemicals It is used for parts that have to work where a metal corrodes or where weight and insulation matter. Typical values:
Details -
Design tips that make Splined Shafts easier and cheaper
Splined Shafts is a shaft with a series of ridges that transmit torque to a mating hub It is used for drive applications where a keyway would be too weak or would need an accurate fit. Typical values: common forms involu
Details -
Design tips that make O-Ring Grooves easier and cheaper
O-Ring Grooves is a groove that locates and compresses an elastomer seal between two faces It is used for any assembly that has to hold pressure without a gasket or a sealant. Typical values: standard ISO 3601 for the gr
Details -
Design tips that make Ti-6Al-4V Titanium easier and cheaper
Ti-6Al-4V Titanium is the standard titanium alloy, with aluminium and vanadium, used where weight and corrosion matter It is used for aerospace structures, medical implants and high performance parts. Typical values: ten
Details
Search:
