-
Hydraulic Manifolds tolerances: what is realistic and what it costs
Hydraulic Manifolds is a block with drilled and ported passages that connects valves, pumps and actuators It is used for replacing pipework with a single machined block, in mobile and industrial hydraulics. Typical value
Details -
Ti-6Al-4V Titanium tolerances: what is realistic and what it costs
Ti-6Al-4V Titanium is the standard titanium alloy, with aluminium and vanadium, used where weight and corrosion matter It is used for aerospace structures, medical implants and high performance parts. Typical values: ten
Details -
Inconel 718 tolerances: what is realistic and what it costs
Inconel 718 is a nickel chromium super alloy that holds strength at high temperature It is used for turbine, downhole and high temperature parts where creep and oxidation set the limit. Typical values: tensile strength 1
Details -
316L Stainless Steel tolerances: what is realistic and what it costs
316L Stainless Steel is a low carbon austenitic stainless steel with molybdenum, for corrosion resistance It is used for medical, food and marine parts, and anything that has to be cleaned aggressively. Typical values: t
Details -
C3604 Brass tolerances: what is realistic and what it costs
C3604 Brass is a free cutting brass with lead, the standard choice for turned parts that have to be fast to make It is used for fittings, connectors and turned components where machinability drives the cost. Typical valu
Details -
Duplex 2205 Stainless Steel tolerances: what is realistic and what it costs
Duplex 2205 Stainless Steel is a two phase stainless steel with roughly equal ferrite and austenite It is used for parts that need high strength and resistance to chloride stress corrosion. Typical values: tensile streng
Details -
4140 Alloy Steel tolerances: what is realistic and what it costs
4140 Alloy Steel is a chromium molybdenum alloy steel used in the quenched and tempered condition It is used for shafts, gears and high strength parts that are heat treated after rough machining. Typical values: tensile
Details -
PEEK tolerances: what is realistic and what it costs
PEEK is a high performance thermoplastic that holds its properties at temperature and resists chemicals It is used for parts that have to work where a metal corrodes or where weight and insulation matter. Typical values:
Details -
O-Ring Grooves tolerances: what is realistic and what it costs
O-Ring Grooves is a groove that locates and compresses an elastomer seal between two faces It is used for any assembly that has to hold pressure without a gasket or a sealant. Typical values: standard ISO 3601 for the gr
Details -
Bearing Housings tolerances: what is realistic and what it costs
Bearing Housings is a bore and shoulder arrangement that locates a rolling bearing and keeps it square It is used for rotating assemblies where the bearing position sets the shaft alignment. Typical values: bore toleranc
Details
Search:
