-
Materials and Swiss-Type Lathe: what works and what does not
Swiss-Type Lathe is a sliding headstock lathe where the bar is supported close to the cutting point by a guide bushing It is used for long, slender turned parts where the length to diameter ratio defeats a conventional l
Details -
Materials and High Speed Machining: what works and what does not
High Speed Machining is milling at high spindle speed with light radial engagement and high feed per tooth It is used for removing metal quickly from thin walled or difficult parts with low cutting force. Typical values:
Details -
Materials and Hard Milling: what works and what does not
Hard Milling is milling material in its hardened state, usually above 45 HRC, with coated carbide or ceramic tools It is used for finishing hardened tool steel and bearing steel without grinding or EDM. Typical values: h
Details -
Materials and Coordinate Measuring Machine: what works and what does not
Coordinate Measuring Machine is a measuring machine that probes points on a part and compares them with the nominal geometry It is used for verifying dimensions and geometric tolerances on finished parts. Typical values:
Details -
Materials and Thread Milling: what works and what does not
Thread Milling is cutting a thread with a rotating cutter that interpolates a helical path, rather than with a tap It is used for threads in hard material, large threads and threads that must be concentric with another f
Details -
Materials and Deep Hole Drilling: what works and what does not
Deep Hole Drilling is drilling holes deeper than about ten times the diameter, with guided tools and high pressure coolant It is used for cooling channels, hydraulic bores and long oil ways that cannot be reached with a
Details -
Materials and CNC Drilling Machine: what works and what does not
CNC Drilling Machine is a machine dedicated to producing holes, with a spindle feed and often a multi spindle head It is used for production drilling, tapping and countersinking on parts with many holes. Typical values:
Details -
Materials and CNC Milling: what works and what does not
CNC Milling is a cutting process where a rotating multi tooth tool removes material from a stationary workpiece It is used for producing flat faces, pockets, slots and contoured surfaces on prismatic parts. Typical value
Details -
Materials and CNC Turning: what works and what does not
CNC Turning is a cutting process where the workpiece rotates and a single point tool removes material It is used for producing diameters, faces, grooves and threads on rotational parts. Typical values: typical tolerance
Details -
Materials and Jig Boring Machine: what works and what does not
Jig Boring Machine is a machine built to position holes accurately, with a thermally stable structure and precision scales It is used for hole patterns where the position between holes matters more than the hole size. Ty
Details
Search:
