-
What drives the cost of Wire EDM Machine
Wire EDM Machine is a machine that cuts conductive material with a travelling brass wire in deionised water, by spark erosion It is used for internal profiles, sharp internal corners and hardened parts that cannot be mil
Details -
What drives the cost of Swiss-Type Lathe
Swiss-Type Lathe is a sliding headstock lathe where the bar is supported close to the cutting point by a guide bushing It is used for long, slender turned parts where the length to diameter ratio defeats a conventional l
Details -
What drives the cost of Turn-Mill Centre
Turn-Mill Centre is a lathe with driven tooling and a Y axis, so milling and turning are completed in one machine It is used for complex parts that would otherwise move between a lathe and a machining centre. Typical val
Details -
What drives the cost of Sinker EDM Machine
Sinker EDM Machine is a machine that forms a cavity by sparking a shaped electrode into the workpiece under dielectric fluid It is used for blind cavities, sharp corners, deep ribs and textured mould surfaces. Typical va
Details -
What drives the cost of Surface Grinding Machine
Surface Grinding Machine is a machine that finishes flat faces with a rotating abrasive wheel and a reciprocating table It is used for holding flatness and parallelism on faces that seal or locate. Typical values: table
Details -
How to specify PPAP Submission on a drawing
PPAP Submission is the production part approval process used in the automotive supply chain, at four levels of evidence It is used for proving that a production process can make the part repeatedly, before series supply
Details -
How to specify EN 10204 Material Certificates on a drawing
EN 10204 Material Certificates is a standard that defines the type of inspection document supplied with a material It is used for proving that the material in the part is what the drawing called for. Typical values: type
Details -
What drives the cost of CNC Lathe
CNC Lathe is a machine that turns the workpiece against a single point tool to produce cylindrical forms It is used for shafts, bushings, flanges and any part whose main features are diameters. Typical values: swing over
Details -
What drives the cost of 5-Axis Machining Centre
5-Axis Machining Centre is a machining centre that can orient the cutter or the workpiece on two additional rotary axes It is used for parts with compound angles, deep cavities and features that would otherwise need seve
Details -
How to specify Heat Sinks on a drawing
Heat Sinks is a machined or extruded finned body that carries heat away from a component It is used for power electronics, LED assemblies and any enclosure that generates heat. Typical values: material aluminium, or copp
Details
Search:
