-
Turn-Mill Centre for medical parts
Turn-Mill Centre is a lathe with driven tooling and a Y axis, so milling and turning are completed in one machine It is used for complex parts that would otherwise move between a lathe and a machining centre. Typical val
Details -
Wire EDM Machine for medical parts
Wire EDM Machine is a machine that cuts conductive material with a travelling brass wire in deionised water, by spark erosion It is used for internal profiles, sharp internal corners and hardened parts that cannot be mil
Details -
Sinker EDM Machine for automotive parts
Sinker EDM Machine is a machine that forms a cavity by sparking a shaped electrode into the workpiece under dielectric fluid It is used for blind cavities, sharp corners, deep ribs and textured mould surfaces. Typical va
Details -
Cylindrical Grinding Machine for automotive parts
Cylindrical Grinding Machine is a machine that finishes external and internal diameters with a rotating wheel and a rotating workpiece It is used for holding diameter tolerance and roundness on shafts, pins and bores aft
Details -
Horizontal Machining Centre for aerospace parts
Horizontal Machining Centre is a milling machine with a horizontal spindle and a rotary table, usually with pallet exchange It is used for parts that need work on several faces in one setup, and for unattended running. T
Details -
CNC Milling Machine for rail parts
CNC Milling Machine is a machine tool that removes material with a rotating cutter while the workpiece is clamped to a moving table It is used for producing prismatic parts, pockets, slots and contoured faces to a drawin
Details -
5-Axis Machining Centre for aerospace parts
5-Axis Machining Centre is a machining centre that can orient the cutter or the workpiece on two additional rotary axes It is used for parts with compound angles, deep cavities and features that would otherwise need seve
Details -
CNC Lathe for aerospace parts
CNC Lathe is a machine that turns the workpiece against a single point tool to produce cylindrical forms It is used for shafts, bushings, flanges and any part whose main features are diameters. Typical values: swing over
Details -
Swiss-Type Lathe for medical parts
Swiss-Type Lathe is a sliding headstock lathe where the bar is supported close to the cutting point by a guide bushing It is used for long, slender turned parts where the length to diameter ratio defeats a conventional l
Details -
What drives the cost of Geometric Dimensioning and Tolerancing
Geometric Dimensioning and Tolerancing is a symbolic language on the drawing that controls form, orientation and position It is used for saying what a part actually has to do, instead of relying on plus minus dimensions
Details
Search:
