-
Surface finish achievable with ISO 2768 General Tolerances
ISO 2768 General Tolerances is a standard that sets the tolerance for dimensions that have no individual tolerance on the drawing It is used for keeping a drawing readable, by not dimensioning every non critical size. Ty
Details -
Surface finish achievable with First Article Inspection
First Article Inspection is a full dimensional check of the first part from a new setup, reported against the drawing It is used for proving that the process can make the part before the batch is committed. Typical value
Details -
Surface finish achievable with EN 10204 Material Certificates
EN 10204 Material Certificates is a standard that defines the type of inspection document supplied with a material It is used for proving that the material in the part is what the drawing called for. Typical values: type
Details -
Surface finish achievable with PPAP Submission
PPAP Submission is the production part approval process used in the automotive supply chain, at four levels of evidence It is used for proving that a production process can make the part repeatedly, before series supply
Details -
CNC Milling Machine inspection and measurement methods
CNC Milling Machine is a machine tool that removes material with a rotating cutter while the workpiece is clamped to a moving table It is used for producing prismatic parts, pockets, slots and contoured faces to a drawin
Details -
Surface finish achievable with Hydraulic Manifolds
Hydraulic Manifolds is a block with drilled and ported passages that connects valves, pumps and actuators It is used for replacing pipework with a single machined block, in mobile and industrial hydraulics. Typical value
Details -
Surface finish achievable with Heat Sinks
Heat Sinks is a machined or extruded finned body that carries heat away from a component It is used for power electronics, LED assemblies and any enclosure that generates heat. Typical values: material aluminium, or copp
Details -
Surface finish achievable with Mould Inserts
Mould Inserts is a replaceable steel component that forms part of a mould cavity It is used for moulds where a wear area, a core or a detail needs to be replaced or machined separately. Typical values: material H13, or a
Details -
Surface finish achievable with Surface Roughness
Surface Roughness is the measure of the fine peaks and valleys left on a surface by the manufacturing process It is used for controlling friction, wear, sealing and appearance on a finished face. Typical values: paramete
Details -
Surface finish achievable with Geometric Dimensioning and Tolerancing
Geometric Dimensioning and Tolerancing is a symbolic language on the drawing that controls form, orientation and position It is used for saying what a part actually has to do, instead of relying on plus minus dimensions
Details
Search:
