-
Source:Injection Moulds / Time:2026-09-16
Family Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Family Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. aluminium for short runs and fast cycling, cycle times
Details -
Source:Injection Moulds / Time:2026-09-16
Two-Plate Injection Mould in 1.2344 hardened steel and polished cavities for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Two-Plate Injection Mould in 1.2344 hardened steel and polished cavities for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. 1.2344 hardened steel and polished cavit
Details -
Source:Injection Moulds / Time:2026-09-16
Insert Moulding Tool in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Insert Moulding Tool in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. aluminium for short runs and fast cycling, cycl
Details -
Source:Injection Moulds / Time:2026-09-16
Over-Moulding Tool in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Over-Moulding Tool in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. aluminium for short runs and fast cycling, cycle
Details -
Source:Injection Moulds / Time:2026-09-16
Injection Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Injection Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. aluminium for short runs and fast cycling, cycle tim
Details -
Source:Injection Moulds / Time:2026-09-16
Prototype Aluminium Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Prototype Aluminium Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. aluminium for short runs and fast cycling,
Details -
Source:Injection Moulds / Time:2026-09-16
Hardened Production Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Hardened Production Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. aluminium for short runs and fast cycling,
Details -
Source:Injection Moulds / Time:2026-09-16
Three-Plate Injection Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Three-Plate Injection Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. aluminium for short runs and fast cyclin
Details -
Source:Injection Moulds / Time:2026-09-16
Unscrewing Mould in 1.2344 hardened steel and polished cavities for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Unscrewing Mould in 1.2344 hardened steel and polished cavities for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. 1.2344 hardened steel and polished cavities, cycl
Details -
Source:Injection Moulds / Time:2026-09-16
Multi-Cavity Injection Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm
Multi-Cavity Injection Mould in aluminium for short runs and fast cycling for automotive interior trim – cycle times from 12 seconds, cavity tolerance ±0.02 mm. aluminium for short runs and fast cycli
Details
Injection Moulds
