-
Fast Turnaround: Centrifugal Pump Housing from Drawing to First Article
A rapid turnaround case on a stainless volute with a machined sealing face: how the job was planned in parallel, programmed and fixtured, and how the first article was approved and delivered against a tight deadline.
Details -
Centrifugal Pump Housing Cost-Down Programme: Lower Unit Cost Without Changing the Drawing
A cost-reduction case study on a stainless volute with a machined sealing face: where the unit cost actually sat, what we changed in the process, the saving achieved and how the specified quality was protected.
Details -
Holding Tight Tolerance on Centrifugal Pump Housing: A Machining Case Study
How we held the required tolerance on a stainless volute with a machined sealing face: where the dimensional risk sat, the controls we put in place, how the result was verified and what the customer received at goods-in.
Details -
Centrifugal Pump Housing CNC Machining Case Study: Brief, Process and Result
A CNC machining case study covering a stainless volute with a machined sealing face: the customer brief, the machining challenge, the process route we used and the result delivered on the production order.
Details -
Quality Plan for Pneumatic Valve Body: First Article, Inspection and Zero Defects
The quality plan behind a zero-defect delivery of a brass or aluminium body for automation equipment: the control plan, in-process controls, final verification and the result recorded at the customer's goods-in.
Details -
5-Axis Strategy for Pneumatic Valve Body: One Setup, Fewer Fixtures
A five-axis machining case study on a brass or aluminium body for automation equipment: why the part suited a single-setup strategy, how the toolpath was programmed and simulated, how it was held and verified, and what it saved.
Details -
Export Programme: Pneumatic Valve Body for a European Machine Builder
An export supply case for a brass or aluminium body for automation equipment: the customer's market and documentation requirements, the compliance work, packaging and logistics, the goods-in result and how the ongoing programme is managed.
Details -
Surface Finish and Finishing for Pneumatic Valve Body: A Case Study
A finishing case study on a brass or aluminium body for automation equipment: the surface requirement, the machining strategy used to achieve it, the finishing operations applied, how the finish was inspected and how the parts were packed.
Details -
Prototype to Production: Scaling Pneumatic Valve Body with CNC Machining
How a brass or aluminium body for automation equipment moved from a machined prototype to a repeatable production programme: design for manufacture changes, fixtures for volume, process capability and the delivery pattern agreed with the.
Details -
Material Selection for Pneumatic Valve Body: A Machining Case Study
A material selection case study for a brass or aluminium body for automation equipment: why the original material was reviewed, what it was changed to, what that changed in machining and how the new specification was approved.
Details -
Fast Turnaround: Pneumatic Valve Body from Drawing to First Article
A rapid turnaround case on a brass or aluminium body for automation equipment: how the job was planned in parallel, programmed and fixtured, and how the first article was approved and delivered against a tight deadline.
Details -
Pneumatic Valve Body Cost-Down Programme: Lower Unit Cost Without Changing the Drawing
A cost-reduction case study on a brass or aluminium body for automation equipment: where the unit cost actually sat, what we changed in the process, the saving achieved and how the specified quality was protected.
Details
Case Studies
