-
Design Feedback on Industrial Pump Impeller: Changes Proposed Before Cutting
A design-for-manufacture review of a stainless impeller with five-axis machined blades: the features that were expensive to produce, the changes we proposed, and how the function was preserved while simplifying the process.
Details -
Batch Repeatability: 5 Units of Industrial Pump Impeller to One Standard
How we held consistent results across a 5-unit batch of a stainless impeller with five-axis machined blades: the controls on tooling, offsets and inspection that keep the first part and the last part the same.
Details -
Re-sourcing Industrial Pump Impeller: Taking Over an Existing Programme
How we took over an established programme for a stainless impeller with five-axis machined blades: reviewing inherited drawings and samples, rebuilding the process, proving it and shipping the first approved batch.
Details -
Cycle Time Down by 25 per cent: Machining Industrial Pump Impeller
A machining improvement programme on a stainless impeller with five-axis machined blades: where the time was going, what we changed in roughing, tooling and handling, and the 25 per cent saving achieved without touching the drawing.
Details -
Fixture Strategy for Industrial Pump Impeller: How We Held the Part
The fixture strategy behind a stainless impeller with five-axis machined blades: how we located the part on its drawing datums, what was built, why those decisions were taken and how the setup performed in production.
Details -
Documentation Pack for Planetary Gear Carrier: What Shipped with the Order
The documentation supplied with a shipment of a fabricated and machined carrier locating three planet pins: what each document is for, why it matters at goods-in and how it is kept valid for repeat orders.
Details -
Emergency Rework: Recovering a Planetary Gear Carrier Order Against the Clock
An emergency recovery job involving a fabricated and machined carrier locating three planet pins: what went wrong at another source, how we planned the recovery in parallel, and how usable parts reached the customer line in time.
Details -
Scheduled Repeat Supply of Planetary Gear Carrier: Planning, Stock and Kanban
A scheduled supply programme for a fabricated and machined carrier locating three planet pins: how releases were agreed, how stock and tooling were held, and how forecast changes were handled without disruption.
Details -
Assembly Fit Check for Planetary Gear Carrier: Machining to the Mating Part
Machining a fabricated and machined carrier locating three planet pins against its mating part: how the fit was defined, checked on the shop floor and then verified at the customer's assembly line.
Details -
Material Change for Planetary Gear Carrier: Trial, Validation and Approval
A material change programme for a fabricated and machined carrier locating three planet pins: why the change was needed, how the trial part was machined and tested, and how the new material was validated and approved.
Details -
Batch Repeatability: 5 Units of Planetary Gear Carrier to One Standard
How we held consistent results across a 5-unit batch of a fabricated and machined carrier locating three planet pins: the controls on tooling, offsets and inspection that keep the first part and the last part the same.
Details -
Design Feedback on Planetary Gear Carrier: Changes Proposed Before Cutting
A design-for-manufacture review of a fabricated and machined carrier locating three planet pins: the features that were expensive to produce, the changes we proposed, and how the function was preserved while simplifying the process.
Details
Case Studies
